2016 kia soul want to add shock sensor and glass break sensor are they compatibale with evo one

Question

looking to add the glass and shock sensors to evo one to get the alarm functionality out of the device,I know a shock sensor is doable have seen it on videos online. but what about a glass break sensor . I was looking at the dei 504d  and the dei 506t. The 506t has a double harness that would connect into the shock sensor and then go into the evo one unit .  

What would be the pin out to make it work and or what options would i have to enable either on the bypass side or the remote start/alarm side to make that work.

Answer 1

There is a dedicated port for connecting sensors to on the Evo-One, it is the black 3 pin port in between the 20 pin connector and the white 2 pin valet port.

The middle pin is the negative input and is capable accepting warn away or pre-trigger inputs. On either side is 12v and ground, Please test the polarites before connecting any sensors to make sure the pinouts match on both units.

Function 14 to mode 2  will enable the alarm feature as well as the sensor port, please wait 1 minute before testing any sensors so that the Evo unit has enabled the sensor input.