Questions & Answers

Is thar hon2 t harness still the same? 2013 civic

0 votes
My install is about a year 1/2 old and i want to redo my istall to the updated version the supports oem key fob functional while the car is running, is the immo ignition wire interruption all i need to do? Lock unlock wires are now on 20 pin plug, on old istall there on the red plug is that the only chage? After immo interruption the yellow wire still goes back to 20 pin plug do i leave that the same? One last question do i need option D1 on ? Its not a standalone istall I'm installing evo all with a crimestopper alarm/remote start but i want the 3xlock to work.
posté Mar 9, 2017 dans la catégorie Honda par julio pelayo (1,650 points)

1 Réponse

0 votes
Yes the immo cut and door lock wires are the main difference. Make sure also that you update the bypass firmware to the newest version using the flash link updater 2.

 

Little tip: do not connect the lock and unlock wires till after the programming. Before connecting them test the vehicle for door locks when running. It may be with the new firmware the door locks will be managed through can and you won't need to connect lock and unlock at all!
répondu Mar 9, 2017 par derek g (339,570 points)
This is not a standalone installation, it's evo all with a crimestopper sp402, i want to use 3xlock do i need option D1 on or is that just for standalone installation?
ya 3x lock would only be for stand alone installation.

If you want to the OEM remote to function while the car is running I suggest you follow this guide: http://fortin.ca/download/62271/evo-all_ig_reg_bi_hon_civic_2012-2015_lock_b_62271.pdf and make all changes nessecary including re program and re flashing the evo.
...