2015 Crosstrek- solid yellow when running, blue flashes when lock/unlock, but no remote start.

Question

I have successfully completed the install, programming, and DCypher flash. I selected the options for Remote Start 3X lock and OE Remote Monitoring, saved them, and reinstalled the Evo. It flashes blue each time the remote lock/unlock is pressed, but shows no red light and does not start when the Lock button is pressed 3X. The yellow light is solid when the car is started by the key. Help!

Answer 1

Make sure the yellow loop on the side of the module is cut for an automatic transmission vehicle.

Comments

Yes, the loop on the module is cut. Is the yellow wire from the T-Harness needed in an Automatic installation? It is not mentioned or pictured in the Automatic installation instructions, yet it is present on the SUB1 T-harness.

---

hi did u ever get this resolved?i am having the same issue with my 2016 legacy.

please let me know if u got it working and what did u do to get it to work,thanks

---

Got it working. Thankfully the guys at Crutchfield are awesome and helped me straighten it out. After reviewing the wiring and finding it all good, I removed the module and updated the firmware to the prior version. It had version 1.20, but that is apparently buggy, so I updated it to version 1.19 and redid the programming sequence and it works.