EVO-ONE wont start with oem remote with factory alarm.

Question

Service no 002B05 027677

 

Hello.  I`m trying to take a work EVO-ONE for subaru outback 2011, automatic transmision, with  factory alarm. so loop is cuted. i used GUIDE # 46701 for harness conection. turning on ignition yelow light goes on. when i pushing lock button 3 times nothing going at all (blue light- no, red light - no). is there problem in incorrect flashing?

 

Service No: 002B05 027677

Preload date: 47-2015

Hardware version: 5

Firmware version: 1.17

Recommended version: 1.16

 

 

 

Answer 1

Turn on options A1 to A11.

Comments

so you reset both sides to the module and also re program and re DCrypted the module and still nothing?

---

yes- still not working

---

turn off function 6 in the remote starter. Also dis able function 24 in the remote starter as well.

---

I think i will leave this till saturday and will check all wiring. then i will reset again so i will let You know saturday. realy thanks for trying to help me 

---

it still wont start. i think i lost my money with Fortin evo-one :(

Answer 2

Hi again. so i was checked all wiring- all set. i was make reset of both sides (remote starter & bypass) then reflashed, but it still not works, so what i can more to do?

Comments

no functionig module. i think i will trash it. lost my money :(

---

This car has been done many times, does the blue LED on the module flash every time you press the lock button ?

---

no.  blue light does not goes on then pushing lock button.

---

http://fortin.ca/en/vehicles/subaru/outback/2011/

Your vehicle is not listed as 3x lock compatible. You will need a seperate RF kit to start and stop the vehicle.

---

can i connect codealarm CA4054?

---

what modules is compactible with fortin ? what i must to buy now?

---

All comnpatible RF kits are listed here:https://fortin.ca/en/technology/rf_kits.html

 

Please click on the EVO-ONE pdfs please to get the proper guide.

---

http://www.ebay.com/itm/Crimestopper-Revo-Start-REVO-1-1-Way-Single-Button-RF-Kit-for-Fortin-1500ft-/351256566385?hash=item51c885da71:g:BJwAAOSwiCRUj5yI

 

I think this RF module will works with Fortin EVO-ONE am I correct?

---

Yes that will work with the Evo-One, please follow this guide for programming: https://fortin.ca/download/29221/EVO-ONE%20RF-KIT%20CrimeStopper%20REVO.pdf

 

Thank you.

---

THANK YOU FOR HELPING ME TO RESOLVE MY PROBLEM !!!!

I will buy this revo set and will try it to install.