Programing help needed 2014 Nissan Frontier

Question

I need help programing my evo-one with T-harness and revo4 rf kit.  The truck started once but the the locks cycled like crazy so i attempted to change some settings and now nothing works.

since it started once i think my wiring is good

can you please tell me what options i need on the bypass and remote start side to get this working?

Thank You

Answer 1

since it started once i think my wiring is good

Not true . Had a (-)parking connected to (+)parking one time. Remote started once yes, but once the vehicle parking lights were turned on, the (+) and (-) signals didnt like eachother and it fried the remote starter. 100% installer error.

 

Here is what i suggest..

1. Master reset remote starter
2. Master reset bypass
3. Reprogram bypass
4. Set appropriate options in the remote starter (32.3, 2.3, 8.2 and the REVO RF-KIT option)
5. Program REVO4 kit to EVO-ONE :

• EVO-ONE & Crimestopper REVO installation guide

 

Steps to Reset Remote Starter

1. Turn ignition ON and hold VALET button until RED LED on the back of the unit starts to flash constantly. Release button when LED starts to flash.
2. Press Valet button 23 times
3. Press and release the brake
4. Press and hold valet for 5 seconds

 

Steps to Reset Bypass

1. Hold down programming button while pluggin in power. LEDs on top of unit will alternate colors.
2. Let go of button when LED is RED
3. Press and hold programming button until all three LEDs start to alternate
4. Disconnect power, bypass is reset.