Evo-one with Oem remote

Question

Hi Sir Please help

 2022 Toyota Sedan push Start

Evo one is connected by THAR-TOY13 for Toyota programmed in car & did key transfer Dcryptor.

Evo one has been update.

everything was done right, but the cardoes not start remotely.when press the lock 3 times no led light on and yellow loop has been cut.

Evo-one SN: 002B04 248953

Thank you very much

Answer 1

Hello,

When you press lock on the oem remote, does the blue led on the unit flash?

If not verify option C1 has been enabled in the evo-one.

Best regards.

Comments

when i press 3 times lock on oem remote the blue led on the unit flash after few seconds 2 red led come on unit but car not start.

C1 on

D6 on

A11 OFF

Function 34  Mode set 3

Function 38  Mode Set 2

Evo-one SN: 002B04 248953

Thank you very much.

---

Please perform the following:

 

- Turn OFF settings protection and save it in the OFF position.

- Master reset the unit in the vehicle: https://fortin.ca/en/download/61931/61931.pdf

- Once reset, re turn to the pc and enable option C1, D6 and turn off A11. Then click save options.

- Re program the unit in the vehicle along with re running dcryptor.

- Once dcryptor is complete, re test 3x lock start.

 

Best regards.

---

Hello.

my car doesn't start and try do Master reset the unit after return to PC do key transfer i get Dcryptor's reached

can you please reset Dcryptor's Limit has been reached for 2022 Toyota corolla push start.

Evo one SN: 002B04 248953

Thank you very much and have a good day.