2015 Corolla H-Key program but no start

Question

Installed with Viper 4105V. Connections were right . Programmed Evo-All, just cranks but does not start. I put the key in the barrel and starts. Red led not coming on when starting, instead it's the yellow led.

Thanks,

Answer 1

Definitly a datalink problem, are you sure you are connected in the D2D port with the WHITE connector on the datalink cable.

Your module options also looks weird I would suggest a master reset and then reprogram to the vehicle.

Press and hold prog button, release on RED led. Press and hold again until LEDs start to alternate. Then disconnect and reprogram.

Answer 2

You have some options turned on that shouldnt be when using a remote starter, options B1, B2, D1, D3. G1, G3 and G4 should be off and you will want to turn option D2 on (if the car has an alarm)

Perform a master rest of the module and make sure the only options on are A1-11, C1, D2 and F3 and reprogram to the vehicle and it should work, the module is currently set to stand alone mode which will not work on this vehicle

Comments

Thank you. It is working now. Great customer support!