my theft system on my 2015 camaro wont let my evo-all install

Question

system theft deterant on after start with no restart. wont let me install evo=all in 2015 camaro

Answer 1

I would start by turning OFF option B2 in the EVOALL options. This is not required for your vehicle.

Are you using a tharness ?

Answer 2

You need to finish the dcryptor process, you will need to "update" the unit, please re-connect the evo-all unit to the computer, access the dcrptor tab and click on 'update unit"

Also turn off option B2 as Mathieu stated before.

Thank you,

Comments

I see that you have finished the update on your dcryptor process, does the vehicle now remote start?

---

hello still nothing do the programmimg end up with red and yellow light. i do have a tharness. try it a hundred times all ready. dcrytor shows i have a green key.

---

This is an automatic transmission car right?

how are you trying to start the vehicle? which button combination are you using?

Easiest solution would be have the vehicle and evo all accessible, have a digital multimeter handy, and call us at 1-877-336-7797, this is a very simple install with not too many things that could go wrong.

 

Thank you

---

i do have automatic. i cant get it to program  . do i have to do the second program for lock car.

---

did second program got slow blue light connect to computer run decryptor connect back to car theft clear off remote wont start car

---

Please turn on D1 also and test, do not reprogram anymore, just turn on that additional option and you should be good

You can turn off options B3 and E1,

don't forget that you need to push LOCK UNLOCK LOCK to remote start your vehicle

---

hi car start but turns off then trys  to turn on by itself . 3 times

---

turn off option b3 as well and re test.

---

hello got oem remote to work. but car dies out and theft sign on dash light up . oem remote is working.

---

theft light flashing means that the immobilizer codes are not being sent properly,

 

Please re-do programming starting on page 7 of the guide, then go back to the computer, re-do dcryptor, UPDATE the unit, and test again without touching any options in the options Tab.

Thank you,

---

hello theft light not flashing she comes on. and car try to start by itself.

---

If the vehicle does not start, then you need to redo the dcryptor process.

---

thank you working  good.