TACH source output from EVO-ALL in 2014 Ford Focus

Question

Is there a TACH or engine RPM signal source with at least 3 volts (AC) and 20 Hz or faster signal when engine is at the idle speed as an output from EVO-ALL?

Answer 1

The Tach Output on the EVO-ALL is the pink wire from the 20-pin connector. If using stand alone configuration, Tach is not available.

 

The output will show 12Vdc at rest and about 6Vdc once the vehicle is running. Remote starters accept this as a tach signal.  There is no AC output.

Comments

Thanks for your fast repsonse!

I will confirm with the push-start system support if this output is sufficient for their system.