Questions & Answers

2013 Ford Edge Can High/Low wires?

0 votes
I believe I have located the correct pins in the diagnostics plug to tap in to but there are 2 wires coming out of each pin. There are 2 Gray/Orange wires and 2 Violet/Orange wires. Does it make a difference which of these wires I apply the tap to?

I also have a set of White and White/Black wires on the EVO that I am unsure where they tap in to. I watched installation videos on this and there was no mention of having to install these wires.
asked Oct 28, 2016 in Ford by Brad Rowland (130 points)

1 Answer

+1 vote
It should not matter which ones for the grey/orange and violet/orange.

If you are using your oem remote to start the car white/black and white do not need to be hooked up.

If using an rf kit you would want to make these connections to the lock and unlock wires as shown in the installation guide.

Here is a link to the installation guide using the FORT1 T-Harness: http://fortin.ca/download/34421/evo-all_ig_tsa_bi_for1-80bits_c_34421.pdf

This shows you all the connections and programming needed.
answered Oct 28, 2016 by derek g (324,940 points)
...