RAM 2500 DIESEL KEY+EVO ALL - REMOTE NOT WAITING FOR A GLOW PLUG

Question

RAM 2500 2014 6.7 DIESEL + EVO ALL STAND ALONE

3X LOCK  REMOTE START WORKS FINE BUT AFTER IGNITION ON DOES  NOT  WAIT FOR GLOW PLUG

C1,D1,D2 ,AND DIESEL MODE IS ON

Answer 1

D1.3

DIESEL MODE EVO-ALL ONLY

Turn On/Off the feature that use special

timing delay (Wait to start) and special

runtime for Diesel Engine.

 

As long as the above is set it and GREEN in the software window should delay the start. Dont forget to save the flash to the unit or it will not work.

SAVE OPTIONS

Saves the selected options in the module.

Comments

D1.3 IS ON ,ALL IS CORRECTLY AND STILL  AFTER IGNITION ON DOES  NOT  WAIT FOR GLOW PLUG

---

Does it delay at all? Evo All only has a ten second delay that can't be changed.

---

I am having the same issue now and it is working but NO delay waits about 10 seconds and starts!  So the D1.3 diesel delay is not working. Pulled the unit and flashed it again and still no delay

 

UPDATE it looks like I have to downgrade the firmware to 0.36 to get the delay for engine warmup and start

---

how do you downgrade?

---

You have to flash the unit again!