Parking Lights not working on 3X Remote Start 2015 Sonata Push to Start EVO-ONE

Question

I have wired the Pink Wire A12 (20 pin connector) from the EVO-ONE to the parking light (-) wire which is shown as a  blue/orange wire #71 in the Wire Color guide for the 2015 Sonata Push to Start.  (connection at black 16 pin connector at steering column -  photo 10 & 11) but the parking lights are not functioning when I 3X start. Can you tell me if this is posisble software option or if wiring is incorrect??

 Notes:  Parking Lights work with OEM remote when locking/unlocking

Installation Based on Guide#17203

Guide shows image with yellow trasnmission wire loop uncut...I needed to cut loop to get the 3X start to work after successfully porgramming the EVO-ONE

Bypass Options A1-A11 & C1 ON

RS Options 38.2

Thanks

Answer 1

The yellow loop needs to be cut depending on the transmission type of the vehicle, and this is left up to the installer to determine at the time of the installation.

 

The Blue/Orange wire for parking lights at the steering column switch NEEDS a 1.5k resistor in line to make the parking lights work in your vehicle..

 

Thank you,

Comments

I was able to get this working..no resistor is needed.  Updated software and options selected in Flashlink Manager

---

This worked intermittently without resisstor but I think i need to add resistor.  Can you confirm this is a 1.5K Ohm resistor inline and what Watt rating is needed?

---

regular resistors 1.5K ohm 1/4 W resistor will do the trick.  The actual value is 1680 Ohm but since resistors can have 10% tolerance, the 1.5K ohm will do the trick.