Questions & Answers

Is there t-harness available for 2018 Outlander Sport standard key?

0 votes
Is there t-harness available for 2018 Outlander Sport standard key?  Thanks!!!
posté depuis 1 semaine dans la catégorie Mitsubishi par artsr2002 (130 points)

1 Réponse

0 votes
Hello,

No at this time there is no t-harness offered for that vehicle. The installation must be manually spliced into the vehicles exisiting wiring.

Best regards.
répondu depuis 1 semaine par derek g (366,400 points)
Thanks.  Another quick questions....When I set up the evo-all as stand alone remote starter, does the guide give info on which wire is for starter and ignition and other wires that would normally be installed from a separate remote starter moduele?
Evo-all in stand alone is not supported on this vehicle.

Evo-all with remote started is.

This would be the installation guide for evo-all with rs: https://cdn02.fortin.ca/download/82101/EVO-ALL_IG_MIT_RVR_2011-2019_KEY_A_82101.pdf

Best regards.
Thanks for the heads up.  I returned the Evo-All and purchased an Evo-One.  I have wired it in per the guide and having issues with it starting the vehicle.

 

During programming, the blue light never fast blinks when I put the key to ON.  Now, when I press the Lock x3, the lights turn on and the car doesn't crank.  It flashes the lights 4 times then tries again, same result.  

2018 Outlander Sport regular standard key, auto transmission. I did cut the yellow loop.  I've tried tachless, and data-link option in the remote starter flasher but still no go.  Same result each time.

 

I think Valet mode might be my problem.  When remote starting, i used a power probe and the starter wire does receive a constant 12v for several seconds but the starter never cranks the car.  i've tried exiting valet mode but i am tired of pressing that stupid button and the led never lights up, the parking lights never blink or light up, and nothing seems to be working.  im about to rip the damned thing out and send it back.  please help.
...