EVO ONE does not see RFK942

Question

Good day to you.

I am having problems programming the RFK942 to the EVO ONE (installed in my 2010 Acura TL with Push-to-Start).  When I connected the antenna to the module (using only the antenna cable the RF kit came with) the blue LED on the RF antenna never turned on.  After several attempts, I decided to remove the EVO ONE and connect it to my computer (running Windows 10) using the Flashlink Updater (running the latest firmware).  The Flashlink Updater could not detect the EVO ONE (and the EVO ONE LEDs never illuminated).  I thought that perhaps the Flashlink Updater was inoperative but when I connected an EVO ALL and two RFK942s to the Updater, I discovered that the Updater is functioning properly.  I just programmed the EVO ONE a week ago and had no issues then.  In fact, the module remote starts the vehicle (Lock 3x on OEM key fob).  Any help would be greatly appreciated.

Answer 1

when connected to the RF port, the small blue port on the evo-one, the antenna will blink once quickly.

I would suggest just calling into support though. Will be a lot easier to troubleshoot your issue.

Comments

I apologize for waiting so long to reply.  The problem was that I did not follow the programming procedure correctly.  I got it work.  Thanks.