evo chr t4

Question

installing on a 08 chrysler 300 and using a chrimestopper sp 502. using the data port but on the brain of the sp 502 the chr t4 harness plugs into the ads port and not the fortin port. does the plug need to be modified to fit the fortin port or is it a misprint  on the sp 502 manual.

Answer 1

Hi John,

 

You need to connect the evo-all to the crimestopper using the rs 232 port, (technically NOT an Idatalink port) As long as the default setting for the datalink protocol of the sp-502 was not changed then you can plug it in and it will communicate.

 

Thank you,